BSS BLU-GPX GPIO Expander med 36 control inputs og 23 logik outputs

The Soundweb London BLU-GPX is a network-controlled GPIO expander which facilitates the cost-effective addition of Control Inputs, Logic Outputs, and Relays to systems requiring extra analog control/interfacing capability. The BLU-GPX features the same rich palette of Logic Objects found in other Soundweb London devices, two PoE-enabled Ethernet ports for communications and primary power, a 12VDC power connector for secondary power, a RS-232 port for compatibility with serial devices, a bank of user-configurable front panel LEDs, a user-configurable front panel LCD, a user-configurable piezo buzzer for audible indication, and locate functionality. The BLU-GPX has 36 Control Inputs. As with the Control Inputs found on other Soundweb London devices, these Control Inputs can be connected to contact closures for controlling binary parameters, resistor ladders for controlling multi-state parameters, or potentiometers for controlling continuous parameters. The BLU-GPX has 23 Logic Outputs. As with the Logic Outputs found on other Soundweb London devices, these Logic Outputs can be connected directly to voltage-controlled electrical components such as LEDs and relays.
Loading...
Leverandør: BSS
Septons varenummer: 720-19012
Leverandør varenummer: BSSBLUGPX-EUFX

The BLU-GPX has 8 integrated Relay Outputs, each with Normally Open (NO) and Normally Closed (NC) terminals. The Relays will open or close in response to HiQnet parameters, and they can be connected directly to resistance-controlled electrical components/circuits. These Relay Outputs reduce the need to source and deploy external relays. The BLU-GPX has 47 Common (ground) connections. A multiplicity of Common connections results in simplified wiring to and from external equipment, reducing the need to span connections across terminal block connectors. Also provided are 12 Reference connections which facilitate 3-wire mode operation.

The BLU-GPX has open architecture which is fully configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The device is configured, controlled, monitored, and powered via either of the two PoE-enabled Ethernet ports. The device can also be controlled and monitored via the serial port. For power source backup, an additional 12VDC connector is provided. A front panel ‘Power Supply’ LED provides convenient indication of power supply status.

On the front panel of the BLU-GPX, there are 48 software-programmable LEDs. Each LED is a multi-color indicator capable of red, green, or yellow illumination. The front panel also contains a software-programmable, monochromatic LCD with 80x16 screen resolution for text-based visual indication of user-defined events. The BLU-GPX has a software-programmable 4 kHz piezo buzzer for audible indication of user-defined events. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.

Features

  • 36 Control Inputs (GPI)
  • 23 Logic Outputs (GPO)
  • 8 NC/NO Relay Outputs
  • 47 Commons for Simple Wiring
  • 12 Reference Connections for 3-Wire Mode
  • 2-Wire or 3-Wire Mode Specifiable per Input Bank
  • 1 Opto-Isolator for Fault Monitoring
  • Rich Palette of Logic Objects
  • 2 PoE-Enabled Ethernet Ports for Configuration, Control, Monitoring, Primary Power, and Redundant Comms
  • 12VDC Secondary Power Connector for Power Source Backup
  • 48 User-Configurable LEDs (Front Panel)
  • User-Configurable LCD (Front Panel)
  • 4kHz Piezo Buzzer for Audible Indication
  • Bi-Directional Locate Functionality
  • EN 54-16 Compliant for life safety applications


Specifications

Chassis19" (single rack space)
DisplayLCD and 48 User-Configurable LEDs (Front Panel)
ConfigSoftware
Logic Processingyes
RS-232yes
GPIOyes
Relay Contacts8 NC/NO Relay Outputs
Power Over Ethernet (PoE)yes
Watchdog Outputyes
Connectors3.5mm Phoenix/Combicon
Power SupplyPrimary: IEEE802.3af Power over Ethernet (PoE), Secondary: 12VDC, 19W external power supply

The BLU-GPX has 8 integrated Relay Outputs, each with Normally Open (NO) and Normally Closed (NC) terminals. The Relays will open or close in response to HiQnet parameters, and they can be connected directly to resistance-controlled electrical components/circuits. These Relay Outputs reduce the need to source and deploy external relays. The BLU-GPX has 47 Common (ground) connections. A multiplicity of Common connections results in simplified wiring to and from external equipment, reducing the need to span connections across terminal block connectors. Also provided are 12 Reference connections which facilitate 3-wire mode operation.

The BLU-GPX has open architecture which is fully configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The device is configured, controlled, monitored, and powered via either of the two PoE-enabled Ethernet ports. The device can also be controlled and monitored via the serial port. For power source backup, an additional 12VDC connector is provided. A front panel ‘Power Supply’ LED provides convenient indication of power supply status.

On the front panel of the BLU-GPX, there are 48 software-programmable LEDs. Each LED is a multi-color indicator capable of red, green, or yellow illumination. The front panel also contains a software-programmable, monochromatic LCD with 80x16 screen resolution for text-based visual indication of user-defined events. The BLU-GPX has a software-programmable 4 kHz piezo buzzer for audible indication of user-defined events. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.

Features

  • 36 Control Inputs (GPI)
  • 23 Logic Outputs (GPO)
  • 8 NC/NO Relay Outputs
  • 47 Commons for Simple Wiring
  • 12 Reference Connections for 3-Wire Mode
  • 2-Wire or 3-Wire Mode Specifiable per Input Bank
  • 1 Opto-Isolator for Fault Monitoring
  • Rich Palette of Logic Objects
  • 2 PoE-Enabled Ethernet Ports for Configuration, Control, Monitoring, Primary Power, and Redundant Comms
  • 12VDC Secondary Power Connector for Power Source Backup
  • 48 User-Configurable LEDs (Front Panel)
  • User-Configurable LCD (Front Panel)
  • 4kHz Piezo Buzzer for Audible Indication
  • Bi-Directional Locate Functionality
  • EN 54-16 Compliant for life safety applications


Specifications

Chassis19" (single rack space)
DisplayLCD and 48 User-Configurable LEDs (Front Panel)
ConfigSoftware
Logic Processingyes
RS-232yes
GPIOyes
Relay Contacts8 NC/NO Relay Outputs
Power Over Ethernet (PoE)yes
Watchdog Outputyes
Connectors3.5mm Phoenix/Combicon
Power SupplyPrimary: IEEE802.3af Power over Ethernet (PoE), Secondary: 12VDC, 19W external power supply
Lars ChristensenHenrik FoldagerJohnny Andreasen
Lars Christensen
Pro Audio Salg

Tlf. direkte: 87 36 20 76
Mobil: 29 39 66 46
Mail: lars@septon.dk
Henrik Foldager
Pro Audio Salg

Tlf. direkte: 87 36 20 73
Mobil: 29 39 81 75
Mail: henrik@septon.dk
Johnny Andreasen
Pro Audio Salg

Tlf. direkte: 87 36 20 71
Mobil: 29 39 31 11
Mail: johnny@septon.dk
*
*
*
Kunder der har købt denne vare købte også

BSS BLU-50v2 | Soundweb DSP, 4 ind / 4 ud, 48 kanaler BLU link, PoE

720-10110
Lydsvag system processor med Blulink. BSS BLU-50 er som BSS BIB (8 x break in) & , BSS BOB (8 x break-out) uden blæser. BSS BLU-50 er derfor en perfekt løsningtil eksempelvis montering i konference- & , møderum hvor produkterne ikke må have blæse støj. Der medfølger 12 volts strømforsyning til BSS BLU-50. Kan ligeledes for strøm via PoE Ethernet port. Det betyder at BLU-50 kan strømfødes, konfigureres, kontrolleres og monitoreres med et CAT5 kabel!BSS BLU-50 er med fri programmerings arkitektur lige som resten af BSS familien. Har ligeledes 12 control inputs og 6 logiske outputs. BSS BLU-50 kan styres via Ipad via motion control.

Rack mount kit BLU-BIB/BLU-BOB

720-19015
The BSS Audio 1U Rack-Mount Kit allows up to two half-rack Soundweb London devices—BLU-BIB and BLU-BOB1—to be mounted on a shelf occupying a single rack space. The 1U Rack-Mount Kit can accommodate one BLU-BIB device, one BLU-BOB1 device, two BLU-BIB devices, two BLU-BOB1 devices, or one of each device. With each device offering eight channels of analog I/O expansion, the 1U Rack-Mount Kit allows for higher I/O density (16 channels) in a single rack space. For instances in which only one I/O expander is mounted, the included half-rack blanking plate can be used to fill the blank space in the front of the rack.

BSS BLU-BIB Soundweb London input expander m. BLU-LINK

720-10150
The Soundweb London BLU-BIB or “break-in box” offers 8 channels of analog audio input expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus. This expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber. The BLU-BIB input channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows assignment to any 8-channel range within the 256 channels available on the digital audio bus. Input channel assignments are configured by DIP switch selection only. The BLU-BIB is not configured by HiQnet™ Audio Architect. Each channel’s input gain and Phantom Power are adjusted using buttons on the front panel. The 8 analog mic/line level inputs utilize the same terminal block connectors as the other members of the Soundweb London family. Signal present, clip, and Phantom Power per channel are displayed by front panel LED indicators. The front panel also contains a power status and applied gain LED indicators. The BLU-BIB operates in three different modes, which are entered and exited via the front panel controls. Edit Mode allows the user to adjust each channel’s input gain and Phantom Power. Normal Mode prevents the user from changing input gain or Phantom Power. Stealth Mode prevents the same changes from occurring, but without LED illumination (except power). The chassis is a half rack wide and can be rack mounted using the BSS Audio 1U Rack-Mount Kit. It can also be under-table mounted or wall mounted using the included mounting brackets. The BLU-BIB break-in box input expander is powered by a 12V DC adapter which is included with the device. The BLU-BIB and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

BSS BLU-BOB1 Soundweb London output expander m/BLU-LINK 1/2-rack

720-10151
BOB1 er halv rack-bredde og er også beregnet til vægmontage eller på pulten. BLU-BOB1 henter 8 påfølgende kanaler på BLU-LINK netværket, fra startadressen som sættes med DIP-switches på bagsiden. BLU-LINK er en low-latency, fail-tolerant digital audio bus på 265 kanaler. Boksen har LED indikatorer for signal på hver kanal, og fødes med 12VDC, 15W ekstern strømforsyning (999-PSU, ikke inkluderet). BLU-BOB1 udgør sammen med de andre medlemmerne, i Soundweb London familien, byggeklodser i et skræddersyet lydsystem.
Filters
Sort
display