AKG HM1000 | hængemodul til små kapsler m/10m kabel

Monterings module til hængende mikrofoner. Krøllefri kabel på 10m inkluderet. Monterings elementer inkluderet. Integreret LED ring indikator.
Loading...
Leverandør: AKG
Septons varenummer: 700-10051
Leverandør varenummer: 2765H00100
High performance hængemodul. HM1000 bruges til at hænge mikrofoner fra loftet for at opfange musik eller tale i kirker, konferencerum eller teater scener. Den har et 10m kabel der er specielt lavet til at undgå vrid. En stål klamme sørger for at holde mikrofonen i samme position. Hængemodulet passer til alle kapsler i DAM serien: CK31, CK32, CK33, CK47 og CK80.
High performance hængemodul. HM1000 bruges til at hænge mikrofoner fra loftet for at opfange musik eller tale i kirker, konferencerum eller teater scener. Den har et 10m kabel der er specielt lavet til at undgå vrid. En stål klamme sørger for at holde mikrofonen i samme position. Hængemodulet passer til alle kapsler i DAM serien: CK31, CK32, CK33, CK47 og CK80.
Recommended Load Impedance:2000 Ohm
Vægt:400 g
Lars ChristensenHenrik FoldagerJohnny Andreasen
Lars Christensen
Pro Audio Salg

Tlf. direkte: 87 36 20 76
Mobil: 29 39 66 46
Mail: lars@septon.dk
Henrik Foldager
Pro Audio Salg

Tlf. direkte: 87 36 20 73
Mobil: 29 39 81 75
Mail: henrik@septon.dk
Johnny Andreasen
Pro Audio Salg

Tlf. direkte: 87 36 20 71
Mobil: 29 39 31 11
Mail: johnny@septon.dk
*
*
*
Kunder der har købt denne vare købte også

BSS BLU-BIB Soundweb London input expander m. BLU-LINK

720-10150
The Soundweb London BLU-BIB or “break-in box” offers 8 channels of analog audio input expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus. This expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber. The BLU-BIB input channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows assignment to any 8-channel range within the 256 channels available on the digital audio bus. Input channel assignments are configured by DIP switch selection only. The BLU-BIB is not configured by HiQnet™ Audio Architect. Each channel’s input gain and Phantom Power are adjusted using buttons on the front panel. The 8 analog mic/line level inputs utilize the same terminal block connectors as the other members of the Soundweb London family. Signal present, clip, and Phantom Power per channel are displayed by front panel LED indicators. The front panel also contains a power status and applied gain LED indicators. The BLU-BIB operates in three different modes, which are entered and exited via the front panel controls. Edit Mode allows the user to adjust each channel’s input gain and Phantom Power. Normal Mode prevents the user from changing input gain or Phantom Power. Stealth Mode prevents the same changes from occurring, but without LED illumination (except power). The chassis is a half rack wide and can be rack mounted using the BSS Audio 1U Rack-Mount Kit. It can also be under-table mounted or wall mounted using the included mounting brackets. The BLU-BIB break-in box input expander is powered by a 12V DC adapter which is included with the device. The BLU-BIB and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Filters
Sort
display